Poseidon 3468 alerts the operator to critical situations (contact opened/closed, or temperature/humidity out of safe range). In case of an alarm, Poseidon sends an e-mail and connects to your NMS (Network Management System) with a SNMP trap. Configuration and current sensor readings are accessible through a graphical WWW interface. IP thermostat function to control outputs locally 2 outputs rated at 250V (double-throw relay contacts) Connect up to 4 temperature or humidity sensors and 4 Dry Contact inputs When a contact is closed, e-mails or SNMP traps are sent to multiple recipients

photo 1   photo 2 Poseidon 3468 Flyer

Applications

• Remote rack monitoring
  Door open, temperature / humidity, power outage, states of contacts, equipment restart

• UPS / back-up generator monitoring
  Fuel level, diesel generator status, remote start over IP, monitoring of temperature and service contacts

• Air conditioning control over IP
  Turns on heating / cooling when specified temperatures are sensed

• IP-based security systems

  • Surveillance systems (external sensors)
  • Equipment status, access control systems

• Operation logging: storages, coolers and freezers (food and pharmaceutical industry)

• Monitoring systems: Information booths, ATMs, terminals

What does Poseidon 3468 measure

Intelligent sensors are connected to the 1Wire (RJ11) bus.

• Total bus length up to 10/30 m.
• Each sensor watches its own readings (SafeRange). When the range is exceeded (alarm condition), e-mail or SNMP trap is invoked.

• Temperature - Temp-1Wire
• Humidity - Humid-1Wire

Sensors with contacts:

• 2 relay outputs
  • PowerEgg
• 4 Dry Contact inputs
  • Flood detector
  • Gas leak detector
  • Smoke detector
  • Motion detector

>> Other sensors

IP thermostat = output control

Each relay output can be controlled either by a local condition, or manually:

• Over WWW by the user
• M2M XML protocol
• M2M SNMP protocol
• M2M Modbus/TCP protocol

The local condition mode works as a thermostat or hygrostat over IP. The output can be tied to any connected sensor, including dry contact inputs. The control is affected by sensor hysteresis.

Basic features

• No special SW needed

• Installation in 10 minutes

• Built-in graphical WWW interface for configuring the unit and displaying the reading (screenshot)

• Outputs controlled over IP or locally (thermostat mode). Outputs can be controlled based on a selected sensor (input) value being less than/greater than specified.

• Alarm alerts:

  • Email
  • SNMP Trap
  • SMS via the PD Trigger application

• Pop-up window with the alert, using the supplied SW application

• With the supplied HWg SDK, you can control Poseidon from your own applications in 2 hours after opening the box

• Applications in IT:

  • Poseidon is supported by more than 60 NMS systems (LoriotPro, Nagios, SNMPc, HP OpenView, IBM Tivoli, MRTG, Intellipool, and more)
  • SDK (Software Development Kit): libraries, examples (ActiveX, VB, Delphi, C, C#, .NET)
   
• Industrial applications:
  • Works with most SCADA systems (OPC server and I/O server via Modbus/TCP)
  • “Soft-PLC” Windows application for remote access to the units, measuring and control
  • Windows application for data collection in the food industry, IT systems for pharmacies

>> Poseidon model XXXX - overview of Poseidon models

Download and links

• Poseidon model 3468
  • Flyer: Poseidon_3468_FL_en.pdf
  • Poseidon family manual: Poseidon_MAN_en.pdf (100 pages)  
  • Latest firmware: Firmware v.3.0.7
    • SNMP MIB is available for download at the main product page under the MIB link.
  
  
• Poseidon line of products: Poseidon_family_en.pdf

• Software
  • UDP Config  UDP_Config.zip
  • >> Software for the Poseidon family
   

Software to use

• UDP Config – Sets the IP addresses and basic configuration parameters of all HW group products
• PD Trigger – Application for collecting and redirecting SNMP alarms (SMS, output control)
• CapTemp – Monitoring of production processes, logging of values, unlimited number of sensors, unlimited number of Poseidon units
• M1 - Monitor One - NMS for monitoring IT infrastructure status over SNMP 

TIP: Create your own custom SW with the HWg SDK. Dozens of ready-made examples simplify your work.

>> Software for the Poseidon family